viscotaq-banner
Print

Fusion Tape™ - Technical Information

Fusion Tape™ Physical Properties

Operating Temperatures (Intermittent): -85°F to 500°F (-65°C to 260°C)
Operating Temperatures (Continuous): -76°F to 392°F (-60°C to 200°C)
Dielectric Strength, Minimum: 400 volts/mil (.020" thick)
Dielectric Constant, 1 KHz: 2.95ptape
Dissipation Factor, 1 KHz: <.0004
Volume Resistivity: 3 x 1014 ohms/cm
Cold Brittle Point, Maximum: -65°C
Water Absorption: 3% maximum by weight
Tensile Strength: 700 psi minimum
Ultimate Elongation: 300% minimum
Tear Resistance: 85 ppi
Durometer Hardness: 50 Shore A room cured 24 hours
Meets or Exceeds: U.S. Military Spec A-A-59163 (formerly MIL-I-46852C) Type II Triangular Guideline and Type I, Rectangular, Self-fusing silicone rubber tape.

msds_icon_50x47 Materials Health, Safety And Environmental Sheet - (pdf)

Flyer - (pdf)

About InduMar

InduMar Products, Inc. has been providing leak repair solutions for 25 years. We operate in all markets where pipe leaks are a problem. In particular our areas of expertise lie in:

  • Refinery/Petrochemical
  • Offshore oil and gas production
  • Commercial Marine
  • Mining
  • Power

"I work tour maintenance. We do emergency maintenance. We have to get things back up and running. Works great on emergency repairs and can be put back in service until shut down to make permanent repairs later on. Thank You!"

A major U.S. Pulp & Paper plant